You decided to install a security system with video camera in somewhere in you new house, the door gate, garage, porch, living room, bedrooms. Maybe you wonder whether it is possible to wire some video cameras to be controlled by one remote controller or not. We have many kinds of remote controllers and we consider a set handy electronic gadget can help you. CB series transmitter,(http://www.ourautomation.com) Model 0021027(CB-6) is one of those transmitters, which can connect with 6 receivers. It pairs with the wireless receiver, Model 0020360(S1UB-DC12). You can control video cameras with just one remote controller easily.
Image
Image
It is so easy to install. Look at the wiring picture.
Image
Image
It is so easy to install. Look at the wiring picture.
Image
Image
Wires on the video camera should be connected to the wireless receiver and power supply. From the picture, the red wire from the video camera is connected to B terminal of the wireless receiver and the black wire is connected to negative electrode of the power supply. The positive wire of the power supply is connected to C terminal of the receiver.
The remote controller and wireless receivers should come to the “Toggle Mode”. This means pressing each button controls each video camera on or off separately.
When press button 1, the remote controller is triggered and sends out an RF signal “ON” to the wireless receiver. After the wireless receiver receives the signal, the corresponding video camera is on. When press button 1 again, the remote controller is triggered and sends out an RF signal “OFF” to the wireless receiver. After the wireless receiver receives the signal, the corresponding video camera is off…
It is really a simple and convenient way to control all video cameras from one remote controller.
Keine Kommentare:
Kommentar veröffentlichen