Car shades are another common way to protect the vehicle. The shades for the rear and front windows are designed to be unfolded and sit against the window. These shades are used to protect the vehicle and the passengers from direct sunlight. What’s more, the U.V ray will penetrate car window and can not escape that the car gets hot. So you need car sun shade to protect yourself and your car. And if you could use a remote controller to control those shades which are activated by motor, It might be very convenient and leisurely.
We are going to control motor to make sun shade up and down with this 2 channel momentary remote switch.
Firstly you need to prepare:
Some lines
Secondly, see the wiring diagram below, C is normally open terminal; A normally closed terminal and B common terminal. Connect terminal C to the positive and connect terminal A to the negative. Terminal B is supposed to be connected to the motor.
Note: The Power supply of receiver and motor must be provided individually in order to avoid interference between them.
Operation:
Press and hold button 1, the motor rotates in positive direction; Release button 1, motor stops rotating.
Press and hold button 2, the motor rotates in reverse direction; Release button 2, motor stops rotating.
Only to press buttons to control car sun shade in your car to avoid direct sunlight and even protect your own privacy in the daytime. It is simple and convenient.
RF Wireless Receiver:
RF Remote Control:
DC Power adapter:
Keine Kommentare:
Kommentar veröffentlichen