I just want to use wireless remote controller to attach his garbage bin outside. When the truck picks up the bin and tips garbage, the controller will detects and turns up a light in the house. So I can know that the garbage is taken away and I can fetch the inner garbage can back. It sounds a very innovative idea. I have no idea to realize it?So I searched on the internet and asked a remote control supplier, they select a remote control kit for me. That is model 0020259 & model 0010032 (S1DA-AC220 & W-12). They are the remote control kit with functions of vibration reminder and time delay.
They told me that W-12 is an RF vibration detector. When the item is vibrated, the vibration detector will be triggered and will send signal to the receiver toinstruct the device to work. S1DA-AC220 is a receiver with a timer.
It looks like great.
With the procedure they shown, I stick the detector to the garbage bin and pull out the antenna. (To see the following picture)
Then I begin to wire. The power supply should be connected to the N&L terminal of the receiver. Wires from the light should be connected to B&N terminal of the receiver. Then I use another wire connect to C&L terminal of the receiver. (Wire as the wiring picture they show me)
The operation time came, I press buttons of “＋” and “－” on the timer to adjust delay time. I set 5 minutes for this timer.
When the truck comes and picks up the garbage bin, the garbage bin is vibrated so that the vibration detector is triggered and the light will shine and last for 5 minutes. Then the light will turn off automatically after 5 minutes. With shining of light, I know that the garbage truck tips garbage into truck and takes away, so I can fetch my inner garbage can back. I like this little , useful, handy gadget.
Online shop: www.ourautomation.com
Keine Kommentare:
Kommentar veröffentlichen